Compact disc

From open-encyclopedia.com - the free encyclopedia.

CD re-directs here; see Cd for other meanings of CD.

Image of a compact disc (pencil included for scale)

A compact disc (or CD) is an optical disc used for storing digital data. It was originally invented for digital audio and is also used as a data storage device, a CD-ROM. CD-ROM reading devices are a standard component of most modern personal computers. In general, audio CDs are distinct from CD-ROMs, and CD players intended for listening to audio cannot make sense of the data on a CD-ROM, though personal computers can generally play audio CDs. It is possible to produce composite CDs containing both data and audio with the latter capable of being played on a CD player, whilst data or perhaps video can be viewed on a computer.

Lately, with the advent of MP3 technology, audio player devices have been developed that can load and play MP3-formatted files from CDs. The advantage of MP3 is that it reduces the amount of space required to store audio by around ten times, thereby increasing maximum playback time per disc from around 74 minutes for CD players to more than 700 for MP3 players without significant degradation in sound quality.

Contents

History

The compact disc was developed in 1979 by Philips and Sony. Philips invented the general manufacturing process, based on their earlier Laserdisc technology, while Sony contributed the error-correction method. 1982 saw its mass production in Langenhagen near Hanover, Germany. Microsoft and Apple Computer were early enthusiasts and promoters of CD-ROMs. John Sculley, CEO of Apple at the time, said as early as 1987 that the CD-ROM would revolutionize the use of personal computers.

Originally the CD was supposed to be 60 minutes, but Sony insisted on it being 74 minutes so it could hold even the slowest versions of Beethoven's 9th Symphony.

Technical details

Compact discs are made from a 1.2 mm thick disc of polycarbonate plastic coated with a much thinner aluminium (originally gold, although you can still buy gold CDs for their data longevity) layer which is protected by a film of lacquer. The lacquer can be printed with a label. Common printing methods for compact discs are silkscreening and offset printing. CDs are available in a range of sizes but the most commonly available is 120 mm (about 5 inches) in diameter. A 120 mm disc can store about 74 minutes of music or about 650 megabytes of data. Discs that can store about 700 megabytes (80 minutes of music) have become more common however. Less common 90, 99, and 100 minute discs also exist but are not compatible with all CD writers or readers. The mini-CD (not to be confused with the similar MiniDisc) is 80 mm (about 3 1/8 inches) in diameter, holds about 184MB of data or 21 minutes of audio, and has the exact same data format as the larger one. Yet another version of the CD has a mini-CD trimmed down to fit in with business cards.

The data format of the disc, known as the 'Red Book' standard, was laid out by the Dutch electronics company Philips, who own the rights to the licensing of the 'CDDA' logo that appears on the disc. In broad terms the format is a two-channel (left and right, for stereo) 16-bit PCM encoding at a 44.1kHz sampling rate. Reed-Solomon error correction allows the CD to be scratched (to a certain degree) without degradation of the contents.

The unusual sampling rate of 44.1kHz comes from a method of converting digital audio into a video signal to be stored on video tape, which was the most affordable way to store it at the time the CD specification was being developed. This technology could store 3 samples in a single horizontal line. A standard NTSC video signal has 245 usable lines per field, and 60 fields a second, which indeed works out at 44100 samples/second. Similarly PAL has 294 lines and 50 fields, which also gives 44100 samples/second. This system could either store 14 bit samples with some error correction, or 16 bit samples with almost no error correction. There was a debate over whether to use 14 or 16 bit samples when they designed the compact disc; 16 bits prevailed. Hence, the decision to use the 16-bit, 44.1kHz sampling rate. The Sony PCM-1630, an early CD mastering machine, was just a modified U-Matic VCR.

The information on a standard CD is encoded as a spiral track of pits moulded into the top of the polycarbonate layer (The areas between pits are known as lands). Each pit is approximately 125 nm deep by 500 nm wide, and varies from 850 nm to 3.5 μm long. The spacing between the tracks is 1.5 μm. To grasp the scale of the pits and land of a CD, if the disc is enlarged to the size of a regular stadium, a pit would have approximately the size of a grain of sand. The spiral begins at the center of the disc and proceeds outwards to the edge, which allows the different size formats available.

A CD is read by focusing a 780 nm wavelength semiconductor laser through the bottom of the polycarbonate layer. The difference in height between pits and lands is one quarter of the wavelength of the laser light, leading to a half-wavelength phase difference between the light reflected from a pit and from its surrounding land. The destructive interference this causes reduces the intensity of the reflected light compared to when the laser is focused on just a land. By measuring this intensity with a photodiode, we are able to read the data from the disc.

The pits and lands themselves do not represent the zeroes and ones of binary data. Instead a change from pit to land or land to pit indicates a one, while no change indicates a zero. This in turn is decoded by reversing the Eight-to-Fourteen Modulation used in mastering the disc, finally revealing the raw data stored on the disc.

Data rate

The data transfer rate for a CD may vary according to the drive in which the CD is placed and type of operation being performed. A 1x speed, for CDs, corresponds to a data transfer rate of 150 kilobytes per second (KB/sec). While traditional music CDs are read at 1x rates, faster speed drives and media have been developed for operation with computers. For example, an 8x CD-ROM data transfer rate would be 1.2 megabytes per second. The fastest transfer rate commonly available is about 52x or about 7.8 megabytes per second, and often this is only available when reading information from a disk. Limitations in the stability of the plastic, vibration and heat typically limit faster operation. CD drives are often sold with three different speed ratings, one speed for write-once operations, one for re-write operations, and one for read-only operations. The speeds are typically listed in that order; ie a 12x/10x/32x CD drive can, CPU and media-permitting, write to CD-R disks at 12x speed (1.8 megabytes/sec), write to CD-RW disks at 10x speed (1.5 megabytes/sec), and read from CD disks at 32x speed (4.8 megabytes/sec).

The 1x speed rating for CDs (150 kilobytes/sec) is not to be confused with the 1x speed rating for DVDs (1.32 megabytes/sec).

Copy protection

The compact disc specification does not include any copy protection mechanism and discs can be easily duplicated or the contents "ripped" to a computer. Starting in early 2002, attempts were made by record companies to market 'copy-protected' compact discs. These rely on deliberate errors being introduced into the data recorded on the disc. The intent is that the error-correction in a music player will enable music to be played as normal, while computer CD-ROM drives will fail with errors. This approach is the subject of an evolutionary arms race or cat-and-mouse game — not all current drives fail, and copying software is being adapted to cope with these damaged data tracks. The recording industry then works on further approaches.

Philips have stated that such discs, which do not meet the Red Book specification, are not permitted to bear the trademarked Compact Disc Digital Audio logo. It also seems likely that Philips' new models of CD recorders will be designed to be able to record from these 'protected' discs. However, there has been great public outcry over copy-protected discs because many see it as a threat to fair use.

Recordability

Injection molding is used to manufacture compact discs. A 'stamper' is made from the original media (audio tape, data disc, etc.) by writing to a photosensitive dye with a laser. This dye is then etched, leaving the data track. It is then plated to make a positive version of the CD. Polycarbonate is liquified and injected into the mold cavity where the stamper transfers the pattern of pits and lands to the polycarbonate disc. The disc is then metallized with aluminum and lacquer coated.

However, there are also CD-recordable discs which can be recorded by a laser beam using a CD-R writer (most often on a computer, though standalone units are also available) and can be played on most compact disc players. CD-R recordings are permanent and cannot be recorded more than once, so the process is also called "burning" a CD. (See also CD burner and overburning.)

CD-RW is a medium that allows multiple recordings on the same disc over and over again. A CD-RW does not have as great a difference in the reflectivity of lands and bumps as a pressed CD or a CD-R, so many CD audio players cannot read CD-RW discs, although the majority of standalone DVD players can.

Recordable compact discs are injection molded with a "blank" data spiral. A photosensitive dye is then applied, and then the discs are metallized and lacquer coated. The write laser of the CD burner changes the characteristics of the dye to allow the read laser of a standard CD player to see the data as it would an injection molded compact disc.

Naming conventions

The correctness of the spellings "disk" and "disc" is not trivial: see http://www.bartleby.com/61/16/C0521600.html.

The term EP is used for both a CD and a vinyl record of intermediate play-time.